73
Regulatory Compliance and Safety Information for the Cisco uBR7200 Series Universal Broadband Routers
78-14140-05
Regulatory Standards Compliance
•Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Note Equipment must be installed and operated using the relevant manuals and only installed with the correct
cables and connectors. Cisco Systems Inc. is not responsible for any radio or television interference
caused by unauthorized changes or modifications to this equipment. Unauthorized changes or
modifications could void the users authority to operate the equipment.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Responsible party:
Cisco Systems Inc.
170 West Tasman Drive
San Jose, CA 95134
USA
+408 526-7208
Regulatory Standards Compliance This section includes all regulatory, safety, EMC (Class A or Class B), telecom, and NEBS standards.
The Cisco uBR7200 Series Universal Broadband Routers and components are in compliance with
national and international standards as described in Table 1.
Table1 Regulatory Standards Compliance
Specification Description
Regulatory Compliance Products with the CE Marking indicate compliance with the 89/336/EEC
January 2002 , which includes the safety and EMC standards listed.
Safety UL 60950
CAN/CSA-C22.2 No. 60950
EN 60950
IEC 60950
AS/NZS 60950
IEC 60825-1
IEC 60825-2
EN 60825-1
EN 60825-2
21 CFR 1040
FCC OET 65
FCC OET 65-C
RSS-102