Chapter 4 Installing the Cisco VG350 Voice Gateway
Safety Recommendations
Warning This equipment contains a ring signal generator (ringer), which is a source of hazardous voltage. Do not touch the
Warning For diverging beams, viewing the laser output with certain optical instruments within a distance of 100 mm may harm your eyes. For collimated beams, viewing the laser output with certain optical instruments designed for use at a distance may harm your eyes. Statement 1054
Warning Installation of the equipment must comply with local and national electrical codes. Statement 1074
General Safety Practices
Follow these guidelines to ensure personal safety and to protect the equipment:
•Keep the chassis area clear and
•Put the removed chassis cover in a safe place.
•Keep tools away from walk areas where you and others could fall over them.
•Do not wear loose clothing that could get caught in the chassis.
•Wear safety glasses if you are working under any conditions that might be hazardous to your eyes.
Warning This equipment must be installed and maintained by service personnel as defined by AS/NZS 3260. Incorrectly connecting this equipment to a
Safety Tips
Use these tips as safety guidelines when installing or working around this equipment:
•Locate the emergency
•Disconnect all power before installing or removing a chassis.
•Do not work alone if potentially hazardous conditions exist.
•Never assume that power is disconnected from a circuit. Always check.
•Look carefully for possible hazards in your work area, such as moist floors, ungrounded power extension cables, and missing safety grounds.
•If an electrical accident occurs, proceed as follows:
–Use caution; do not become a victim yourself.
–Turn off power to the system.
Cisco VG350 Voice Gateway Hardware Installation Guide
|
| |
|
