Cisco Systems WBP54G manual

Models: WBP54G

1 55
Download 55 pages 1.7 Kb
Page 15
Image 15
Manual background

Wireless-G Bridge for Phone Adapters

7.A list of all Bridges for Phone Adapters that can be detected by the Setup Wizard will be displayed. Select the Bridge you are installing and click Next. If the Bridge you want is not displayed, click the Refresh List button to search again.

8.This screen will display a list of wireless networks that can be detected and their status information: SSID (network name), MAC Address, Channel, Signal (strength), and Security (method). Select the wireless network you want.

If the network you want is not displayed, click the Refresh List button to search again.

To manually enter the SSID of the network you want, click the SSID radio button and complete the SSID field.

IMPORTANT: Some wireless access points or routers do not broadcast their status information. If you do not see the network you want, click the SSID radio button and manually enter its SSID.

Click Next to proceed, or click Back to return to the previous screen.

Chapter 4: Setting Up and Connecting the Wireless-G Bridge for Phone Adapters

Figure 4-7: Wireless-G Bridge Setup Screen

Figure 4-8: Choose a Wireless Network Screen

10

Running the Setup Wizard

Page 15
Image 15
Cisco Systems WBP54G manual