Cisco Systems WRK54G manual Port Services

Wireless-G Broadband Router

Then, enter the range of ports you want to filter.

If the service you want to block is not listed or you want to edit a service’s settings, then click the Add/Edit Service button. Then the Port Services screen will appear.

To add a service, enter the service’s name in the Service Name field. Select its protocol from the Protocol drop-down menu, and enter its range in the Port Range fields. Then click the Add button.

To modify a service, select it from the list on the right. Change its name, protocol setting, or port range. Then click the Modify button.

To delete a service, select it from the list on the right. Then click the Delete button.

When you are finished making changes on the Port Services screen, click the Apply button to save changes. If you want to cancel your changes, click the Cancel button. To close the Port Services screen and return to the Access Restrictions screen, click the Close button.

9.If you want to block websites with specific URL addresses, enter each URL in a separate field next to Website Blocking by URL Address.

10.If you want to block websites using specific keywords, enter each keyword in a separate field next to Website Blocking by Keyword.

Change these settings as described here and click the Save Settings button to apply your changes or Cancel Changes to cancel your changes.

Chapter 5: Configuring the Wireless-G Broadband Router

Figure 5-33: Port Services

29

The Access Restrictions Tab - Internet Access