Category. From this
These Categories include applications, ethernet ports, MAC addresses, and online games.
Application. With this option you can select None, Add a New Application, Online Game, or select from the list of applications you want to set. To create a new entry, select Add a New Application, and refer to the Add a New Application section.
Priority. Select the bandwidth priority for the application you selected. Select High, Medium, Normal, or Low for the bandwidth you need for that application. Don’t set all applications to High, because this will defeat the purpose of allocating the available bandwidth. If you want to select below normal bandwidth, select Low. Depending on the application, a few attempts may be needed to achieve your goal. Once you have made your selection, click Add to add to the Summary list.
Add a New Application
Enter a Name | Enter any name to indicate the name of the entry. |
|
Category | Select from Port Range or MAC Address for the Router to use to set the bandwidth priority. |
|
Port Range | If you selected Port Range, then this category will be available. It allows you to enter the port |
|
| range that the application will be using. For example, if you want to allocate bandwidth for |
|
| FTP, you can enter |
|
| you enter |
|
| bandwidth allocation. Port numbers can range from 1 to 65535. Check your application's |
|
| documentation for details on the service ports used. |
|
MAC Address | If you selected MAC Address, then this category will be available. Enter the 12 hexadecimal |
|
| digit MAC Address to represent the device you want to set as a bandwidth priority. This is a |
|
| unique identifier for your network device. When the Router identifies the device entered, the |
|
| Router will allocate the priority set for that entry. Check the device’s documentation to obtain |
|
| the MAC Address. |
|
Priority | Select the bandwidth priority for the application you selected. Select High, Medium, Normal, |
|
| or Low for the bandwidth, but don’t set all applications to High. Once you have made your | Figure |
| selection, click Add to add to the Summary list. | |
|
| Adding an New Application |
Chapter 5: Configuring the | 33 |
The Applications and Gaming Tab - QoS