Cisco Systems WS-X6066-SLB-S-K9 manual Tighten the two captive installation screws on the module

Installing the CSM-S

Figure 4 Ejector Lever Closure in a Horizontal Slot Chassis

FAN STATUS

1

2

3

4

5

6

WS-X6K-SUP2-2GE

SUPERVISOR2

WS-X6K-SUP2-2GE

SUPERVISOR2

WS-C6500-SFM

SWITCH FABRIC MDL

		Switch	Load
	CONSOLE	100%
			PORT 1
	PORT			PORT 2
CONSOLE	MODE
	PCMCIA	EJECT
		1%
		Switch	Load
	CONSOLE	100%
			PORT 1
	PORT			PORT 2
CONSOLE	MODE
	PCMCIA
		EJECT
		1%

SELECT

NEXT

58571

Ejector levers flush with module faceplate

Note Failure to fully seat the module in the backplane connector can result in system messages.

e.Tighten the two captive installation screws on the module.

Note Make sure that the ejector levers are fully closed before tightening the captive installation screws.

Vertical slots

a.Position the switching module in the slot. (See Figure 5.) Make sure that you align the sides of the switching-module carrier with the slot guides on the top and bottom of the slot.

Catalyst 6500 Series Switch Content Switching Module with SSL Installation Note

78-16856-01 17