9
Catalyst 6500 Series Switch Content Switching Module with SSL Installation Note
78-16856-01
Environmental and System Requirements
RJ-45 Connector
The RJ-45 connector, which is covered by a removable plate, is used to connect a management station
device or a test device. This connector is used by field engineers to perform testing and to obtain dump
information.
SSL Connector
The Certificate Management (Cert. Mgt.) port connector is used for SSL certificate management and is
available to make the necessary connection to the SSL daughter card for initial configuration purposes.
After the initial configurations, you can make an SSH or Telnet connection to further configure the
module. See Chapter 5 in the Catalyst 6500 Series Content Switching Module with SSL Installation and
Configuration Note.
Environmental and System Requirements
These sections describe the environmental and system requirements:
•Environmental Requirements, page 9
•System Requirements, page 10
•Memory Requirements, page 10
•Power Supply, page10
•Hardware Supported, page 10
•Software Requirements, page 11
•Software Compatibility, page11
Environmental Requirements
Tabl e 2 lists the environmental requirements for the CSM-S.
Table2 CSM-S Environmental Requirements
Item Specification
Temperature, ambient operating 0o to 40oC (32o to 104oF)
Temperature, ambient nonoperating –40o to 70oC (–40o to 158oF)
Humidity (RH), ambient (noncondensing)
operating
10% to 90%
Nonoperating relative humidity (noncondensing) 5% to 95%