3-7
Cisco Catalyst 4900M Switch Installation Guide
78-18350-02
Chapter 3 Installing the Switch
Connecting Power to the Catalyst 4900M Switch
Figure 3-3Installing the Cable Guide
Step 6Do not connect the power cord at this time. Proceed to the “Connecting Power to the Catalyst 4900M
Switch” section on page 3-7.
Connecting Power to the Catalyst 4900M Switch
Follow these steps and warnings when connecting power to the Catalyst 4900M switch:
Step 1Prior to connecting the power supply to a power source, ensure that all of the site power and grounding
requirements described in Chapter 2, “Site Planning,” have been met and the chassis is properly
grounded as described in the “Grounding Requirements” section on page 2-7. The grounding pad for the
switch is shown in Figure 3-4.
232127