2-9
Cisco Catalyst 4900M Switch Installation Guide
78-18350-02
Chapter 2 Site Planning
Site Planning Checklist

Preventing Electrostatic Discharge Damage

Electrostatic discharge (ESD) damage occurs when electronic cards or components are improperly
handled and can result in complete or intermittent failures. Follow these guidelines to prevent ESD
damage:
•Always use an ESD-preventive wrist or ankle strap, and ensure that it makes maximum contact with
the skin.
•When coming into contact with any internal components, always use a wrist strap connected to one
of the following:
–
ESD wrist strap connector
–
Any unpainted grounded surface on the chassis or equipment rack
CautionPeriodically check the resistance value of the antistatic strap. The measurement should be between 1 and
10 megohms (Mohms).
•Handle cards by the edges only.
•Avoid contact between the modules and clothing. The wrist strap protects only the card from ESD
voltages on the body; ESD voltages on clothing can still cause damage.
Site Planning Checklist
Table 2-2 lists the site planning activities that you should perform before you install the Catalyst 4900M
switch. Completing each activity helps to ensure a successful switch installation.
Table 2-2Site Planning Checklist
Task No.Planning Activity Verified ByTime Date
1Space evaluation:
Space and layout
Floor covering
Shock and vibration
Lighting
Maintenance access
2Environmental evaluation:
Ambient temperature
Humidity
Altitude
Atmospheric contamination
Airflow
3Power evaluation:
Input power type
Receptacle proximity to the equipment
Dedicated (separate) circuits for redundant power
supplies
UPS for power failures