4-17
Catalyst 4500 E-Series Switches Installation Guide
OL-13972-01
Chapter 4 Removing and Replacing FRUs
Replacing Backplane Modules
Figure 4-20 Releasing the Module
Step 7 Pull out the module while holding the top left and top right corners. (See Figure 4-21.)
Note When handling the modules, do not touch the chips or the gold edge contacts on the module.
Figure 4-21 Removing the Module
Step 8 Put the replacement module in at roughly a 30 degree angle, and gently push the module down. Make
sure you apply force evenly on the left and right. (See Figure 4-22.)
Figure 4-22 Seating the Replacement Module
Step 9 Make sure the module is fully seated. (See Figure 4-23.)
130659
130660
130661