Cisco Systems WVC80N manual Player Commands, Query, Example rtsp//ip/img/video.sav?latency=no

Appendix D

CGI Commands

If the client player is the QuickTime player, the latency is always approximately 3 second. If there is no audio content in the streaming, you can use the extension parameter “[?&]latency=no” to push the QuickTime player to play the streaming video without any latency, but this method causes the frame rate to be unstable.

Example: rtsp://<ip>/img/video.sav?latency=no

Note that the camera is able to support the following four RTP protocols, but the user needs to specify the desired RTP protocol in the player.

••	Unicast RTP
••	Multicast RTP
•• RTP over RTSP (RTP over TCP)
•• RTP over RTSP over HTTP (HTTP tunnel)
Return:	Video and/or audio is returned.

Player Commands

Query

Method: GET

URL:http://<ip>/util/query.cgi[?extension=value]

This command retrieves the hardware capability, component setting or current status. For example, you can query whether the camera has a speaker, I/O port, etc.

Parameter

Value and description

extension

Extension value

yes: extension is enabled, the extended data as below will be extended to generic responses fw_ver=V1.0.0 build 01\r\n

ip_addr=192.168.1.12\r\n netmask=255.255.255.0\r\n gateway=192.168.1.1\r\n

current_time=07/02/2008 10:12:10\r\n -> MM/DD/YYYY HH:MM:SS 24-Hour format timezone=4\r\n

http_port=80\r\n rtsp_port=554\r\n

Return:

HTTP/1.0 200 OK \r\n

…

content-type: text/plain\r\n \r\n

<parameter pair>\r\n <parameter pair>\r\n

......

Wireless-N Internet Home Monitoring Camera 30