Cisco Systems WVC80N manual Setup, Installing and Using the Camera Utility, Chapter, Memory Status

Chapter 2

Installing and Using the Camera Utility

The controls and their functions are described below.

Control	Function
	Play/Pause  Click this button to toggle
	the video between play and pause.
	Playback Speed  Click and drag the
	wheel clockwise to increase the speed of
	the video playback, or counterclockwise
	to decrease the speed of the video
	playback. When the wheel is centered
	(with the indicator at the top position),
	the video will play at normal speed.
	Frame by Frame  Click these buttons to
	go back (left arrow) or go forward (right
	arrow) exactly one video frame.
	Previous/Next  Click these buttons to
	view the previous (left arrow) or the
	next (right arrow) recording.
	Zoom  Move the slider to the right of
	this icon to zoom into the current video
	display. The zoom factor cycles from 1x
	to 16x.
	Snapshot  Click this button to capture a
	still image of the current video display.
	Print  Click this button to print the
	current video image.
	Sound  Click this button to toggle the
	sound off or on. Move the slider to the
	left to decrease the volume or to the
	right to increase the volume.

Memory Status

This section of the View Recordings window indicates, in hours and gigabytes (GB), how much hard disk space is available for recorded video.

Memory Status

Wireless-N Internet Home Monitoring Camera

Video Playback

The section at the bottom of the View Recordings window is used to locate video for playback.

Video Playback

To locate and play a recording:

1.If you want to see all available recordings, toggle the button above the timeline to View all recordings. If you want to see only those recordings which were triggered by motion detection, toggle the button to View by motion detection only.

2.Using the calendar to the right of the timeline, select the date of the recording you want to view. (Bolded dates have recordings.)

3.The timeline displays blue bars where recordings are available. To display video from a specific time, click and drag the marker above the timeline to any point above a blue bar. The marker will display the date and time of the point you have chosen.

4.The video plays, starting from the point you have chosen.

Setup

The Setup screen is accessed by clicking the Setup icon. There are three tabs along the top of the Setup screen: Cameras, Recording Options, and Settings. By default, the Cameras tab is selected when the Setup screen is opened. These tabs display screens whose functions are described below.

Setup > Cameras

Click the Cameras tab to set up a network Camera.

Setup > Cameras

9