6

Maintenance of the machine

General maintenance

p Clean the entire cabinet of the machine regularly and remove all traces of soap,

etc....

p Remove all detergent residue in the soap dispenser with hot water. p Clean the door gasket and remove all detergents and other products.

p Shut off the main water, steam and power connections at the end of each day. Do not change the setting of the water inlet taps on boiler fed machines once these have been installed.

p It is recommended to leave the door and the soap dispenser open after use, to ventilate the machine.

Periodical maintenance p The V-belts of the motors should be retightened after two to three months when first used. This is necessary because these belts are subject to a one-time stretching when first used. By ignoring this instruction, the belt starts to slip after a few months and will brake shortly afterwards.

pCheck regularly if the filters of the water inlet are not blocked by calcification.

pIf a machine frequently skips the final spin, check whether the probe of the out of balance switch is still in the appropriate position, that is horizontally centered and vertically 1/3 from the bottom inside the window. (When the drum is empty).

pAn obstructed drain can cause frequent interruption of spinning for safety reasons.

pThe automatic lubricator needs to be replaced each year. (Order number: 212/ 00002/00)

Repair and after-sales

p In case of important malfunctions and deficiencies which you cannot resolve

service

yourself, do not hesitate to contact the technical service of your distributor.

 

 

 

 

 

 

Data distributor:

 

Name:

 

 

 

 

 

Address:

 

 

 

 

 

 

 

 

 

 

Tel.:

 

 

 

 

 

 

 

Data machine:

Type:

 

 

 

 

 

Program:

 

 

 

 

 

Date of installation: .............................................................

Installed by: ........................................................................

Serial number: ....................................................................

Operation voltage and frequency: .........................................

The manufacturer reserves the right to change the content of this instruc- tion manual, at all times and without previous notice.

15

Page 15
Image 15
Cissell HF575, HF455 manual Maintenance of the machine, General maintenance, Repair and after-sales, Service