Cissell LDBB, LDCC •Allow heated surfaces to cool, •Shut off and lock out ALL air service to the press, •Shut off and lock out ALL steam service to the press

Safety Information

12.Replace worn power cords and/or loose plugs.

13.Never operate the press with any guards and/or panels removed.

14.DO NOT operate the press with missing or broken parts.

15.DO NOT bypass any safety devices.

16.Failure to install, maintain, and/or operate this press according to the manufacturer’s instructions may result in conditions which can produce bodily injury and/or property damage.

NOTE: The WARNINGS and IMPORTANT SAFETY INSTRUCTIONS appearing in this manual are not meant to cover all possible conditions and situations that may occur. Common sense, caution and care must be exercised when installing, maintaining, or operating the press.

Any problems or conditions not understood should be reported to the dealer, distributor, service agent or the manufacturer.

When using your press (garment finishing appliance), basic precautions should always be followed, including the following:

1.Read all instructions.

2.Use appliance only for its intended use.

3.Close supervision is necessary for any appliances being used by or near children. Do not leave appliance unattended while connected.

4.To reduce the likelihood of circuit overload, do not operate another high wattage appliance on the same circuit.

Safety signs and labels are also placed on the press. Those signs and labels are limited messages. Where needed, further explanations are provided in the manual. These signs are to be inspected for readability and replaced when missing, damaged or unreadable. Refer to Operation/Maintenance Manual for inspections process. Refer to parts manual for ordering information.

DANGER

To avoid possible serious injury, ensure that air and steam supply systems have adequate RELIEF VALVE PROTECTION or have the pressures sufficiently limited at the sources for safe operating pressures as specified for this equipment.

W333

WARNING

To AVOID possible serious injury, BEFORE performing maintenance or repair tasks:

•Shut off and lock out ALL electric power to the press.•Shut off and lock out ALL air service to the press.•Shut off and lock out ALL steam service to the press.•Allow heated surfaces to cool.

W358

WARNING

•Failure to install, maintain, and/or operate this machine according to the manufacturer’s instructions may result in conditions which can produce serious injury, death, and/or property damage.

•Do not repair or replace any part of the machine or attempt any servicing unless specifically recommended or published in the service manual and that you understand and have the skills to carry out.

•Whenever ground wires are removed during servicing, these ground wires must be reconnected to ensure that the machine is properly grounded and to reduce the risk of fire, electric shock, serious injury, or death.

W335

AJ1031