Citizen CH-485E Changeover of the time system, How to set the alarm, Without alarm With alarm

11.Changeover of the “time system”

●After the completion of the day-of-the-month correction as de- scribed above, press “SELECT” switch to place the unit in the time system selection state.

●Every time “SET” switch is pressed, the 12-hour system (12H)

and 24-hour system (24H) will be changed over.

● Press “SELECT” switch after activating the time system indica- tion on the display to revert the display to the time indication. This completes the clock setting procedure.

12.How to set the alarm

●While alarm symbol “bell” is shown on the display, the alarm will sound for 30 seconds when the alarm time is reached. The alarm sounds only when the time indication is shown on the display.

●To stop the alarm, press any switch.

●To change over the alarm status between SET/RELEASE, press “SET” switch while the time indication is shown on the display.

Time indication	Alarm time indication	Time indication
(without alarm)		(with alarm)

- Eng 10 -