3. Correcting the “minute” of an alarm time

Press “SELECT” switch for one second or more to place the

unit in the alarm-time minute correction state.

Press “SET” switch to increase the minute of the alarm time in increments of one minute.

4. Correcting the “hour” of an alarm time

After the completion of the alarm-time minute correction as

described above, press “SELECT” switch to place the unit in the alarm-time hour correction state.

Press “SET” switch to increase the hour of the alarm time in increments of one hour.

5. Correcting the “second” of the current time

After the completion of the alarm-time hour correction as de-

scribed above, press “SELECT” switch for one second or more to place the unit in the current-time second correction state.

Press “SET” switch to reset the second indication to 00. Press

“SET” switch according to a time signal. Note that the minute indication on the display will advance when the seconds given is 30 to 59 seconds of a minute.

6. Correction of the “minute” of the current time

After the completion of the current-time second correction as

described above, press “SELECT” switch to place the unit in the current-time minute correction state.

Press “SET” switch to increase the minute of the current time

in increments of one minute.

- Eng 8 -

Page 8
Image 8
Citizen CH-485E instruction manual Correcting the minute of an alarm time, Correcting the hour of an alarm time