Description of Display Marks, Remeasure

DESCRIPTION OF DISPLAY MARKS

DISPLAY MARK	CONDITION / CAUSE	CORRECTIVE ACTION

	Measurement is begun, but the	Repeat measurement again.
	pressure was insufficient.

Appears when the blood pres-
sure could not be measured ac-
curately. (Some noises were
detected by the movement of
arm during measurement.)
	Repeat measurement again.
	First, exhaust air from the cuff,
	First, exhaust air from the cuff,
Appears when the pulse could	reapply the cuff properly and
Appears when the pulse could	remeasure.
not be measured.

Appears when batteries be- come weak.

Replace the batteries.

Device has a trouble.

Ask purchased shop.

- Eng 20 -

Page 20

Image 20

Citizen CH-485E Description of Display Marks, Appears when the blood pres, Curately. Some noises were, Remeasure

Contents

Model CH-485E General Remarks For proper measurement of blood pressure Precaution for USE and Maintenance Universal Design Display section SET switchIdentification of Parts HOW to Load Batteries Open the cover of battery compartmentClose the battery compartment cover Place batteries in the compartment Time indicating section Mode switch SET switch HOW to SET the ClockData correcting procedure Correcting the minute of an alarm time Correcting the hour of an alarm timeCorrecting the second of the current time Correction of the minute of the current time Correction of the hour of the current time Correction of the yearCorrection of the month Correction of the day of the month Changeover of the time system How to set the alarmWithout alarm With alarm HOW to Measure Your Blood Pressure Put the cuff around your arm You may measure your blood pressure in the laying posture Insert the air hose plug into the main unit Start measurement Manual pressurization Store the cuff in the pocket Data number 1, 2 Earliest data Automatic Changeover FeaturePress POWER/MEASURE switch after the comple Press Memory call switch HOW to Delete Data Stored in Memory Resetting Operation Changing the Batteries Appears when the blood pres Description of Display MarksCurately. Some noises were Arm during measurement Measuring Marks Exhaust Re-Measure Battery Switch Power switch InflationDimensions Accuracy Pressure What is blood pressure About Blood PressureBlood pressure changes at all times Blood Questions and Answers on Blood Pressure Before Asking for REPAIR/INSPECTION

Citizen CH-485E Description of Display Marks, Appears when the blood pres, Arm during measurement

Models: CH-485E

DESCRIPTION OF DISPLAY MARKS

DISPLAY MARK

CONDITION / CAUSE

CORRECTIVE ACTION

Appears when the blood pres-

curately. (Some noises were

arm during measurement.)

remeasure.