HOW TO SET THE CLOCK

1.Initial state (when the batteries are loaded in the unit for the first time, carry out resetting operation)

* Date/hour/alarm setting when the batteries have been loaded in the unit for the first time

Date and time: 12:00 am, January 1, 2002

Alarm:

12:00 am, alarm is in OFF state

English

2. Data correcting procedure

The alarm time, current time and calendar should be set in the written order.

*Every press on “SELECT” switch selects a data item to be modified in the order shown below. The selected item flashes on and off.

1)

Alarm, minute / 2) Alarm, hour / 3) Second / 4) Minute / 5) Hour /

6)

Year / 7) Month / 8) Day of month / 9) Time system (12-hour or 24-hour sys

*Press “SET” switch to increase the indicated value in increments of one. Keep “SET” switch held pressed to carry out correction quickly.

*The aforementioned switch performance will not be carried out for the correction of “3) Second” and “9) Time system (12-hour or 24-hour system).”

*After the completion of correction of all items as required, press “POWER/MEASURE” switch to restore the time indication to the display.

Data indicating section

Time indicating section

“MODE” switch

“SET” switch

- Eng 7 -

Page 7
Image 7
Citizen CH-485E HOW to SET the Clock, Data correcting procedure, Time indicating section Mode switch SET switch