Citizen Systems 291, CBM-290 user manual Command Details, Value BIT Function

CBM-290/291 User’s Manual

9.2Command Details

(1)Horizontal Tab Command (HT)

Code : (09)h

Shifts the printing position to the next horizontal tab position. The horizontal tab position is set by ESC D. Initial setting of the horizontal tab position is each 8 characters in 9th, 17th, 25th, 33rd, columns.

(2)Print Command (CR) Code : (0D)h

1)When DS 1 -2 is OFF: This command is ignored.

2)When DS 1- 2 is ON:

With data held inside the internal print buffer, printing and line feed are performed.

Without data inside the internal print buffer, however, no printing is performed.

(3)Printing and Paper Feed Command (LF) Code : (0A)h

Prints data inside the input buffer and feeds lines based on the line feed amount having been set.

(4)Setting the right space amount of the characters (ESC SP n) Code : (1B)h + (20)h + n

* {0 ≤ n ≤ 20} Data is described in Hex code.

The rightward space amount is set in dot unit (1/203 inch unit). In the initial value, it is n=0. The rightward space amount in double wide mode is made double of the set volume.

(5)Collective Specifying Printing Mode (ESC ! n) Code: (1B)h + (21)h + n

* {0 ≤ n ≤ FF}			Data is described in Hex code.
Printing mode is assigned. Each n bit indicates the following:
				VALUE
	BIT	FUNCTION		0	1
	0	Character Font		Font A	Font B
	1	Undefined
	2	Undefined
	3	High-lighting		Canceled	Specified
	4	Double height		Canceled	Specified
	5	Double width		Canceled	Specified
	6	Undefined
	7	Underline		Canceled	Specified

25 CITIZEN