(40)Aligning the characters (ESC a n) Code : [1b}h + [61]h + n
* {0 ≤ n ≤ 2} Data is described in Hex code.
All the printed data within one line are aligned in the specified position.
•Depending on n value, positional alignment is carried out as in the table below:
n (Hex) | POSITION |
0 | Left end alignment |
1 | Centering |
2 | Right end alignment |
•This is valid only when n is inputted at the beginning of line.
•The initial value of n is "0".
(41) Full Cut (ESC i) Code : [1B]h + [69]h
Activating auto cutter (Full cut)
•This is valid only when n is inputted at the beginning of line.
•Make sure to feed the paper by 18 mm or more before cutting paper, unless characters remain before the cutting point.
Print Result | Cutting Condition |
40 | CITIZEN |
