Chapter 9 Specifications

DTR protocol

DTR signal "Ready (High)" level requirements:

The following must be satisfied:

Printer is on line.

Receive buffer has more than 1K bytes available.

Note: When receive buffer has less than 128 bytes available, DTR signal becomes "Busy (Low)" level and this "Busy (Low) level is kept until receive buffer has at least 1K bytes available.

DTR signal "Busy (Low)" level requirements:

The following must be satisfied:

Printer is in error.

Receive buffer has less than 128 bytes available.

Pin assignment

57

Page 67
Image 67
Citizen Systems CLP-9001, CLP-9301 user manual DTR protocol, Pin assignment