Citizen Systems pmn manual DC1

iDP3410 User's Manual

SI

[Function]	Canceling the double width character
[Code]	<0F>H
[Outline]	This command cancels the double width characters set with SO. The data following this
	command are printed in the ordinary character width.

LF

[Function]	Printing and paper feed
[Code]	<0A>H
[Outline]	If the print buffer contains the data, this command will feed the line after printing. If not,
	the command only feeds the line.

CR

[Function]	Printing
[Code]	<0D>H
[Outline]	This command prints the data. If the DIP switch segments 1 to 6 are set to OFF, the
	printer will print the data in the print buffer and feed the paper by one line. If they are set
	to ON, the printer will print the data in the print buffer and will not feed the paper.

DC1

[Function]	Initializing the printer
[Code]	<11>H
[Outline]	This command initializes the printer.
	The input buffer is not cleared.
	The settings of the DIP switch segments are not re-read.

DC2

[Function]	Specifying/Canceling the inverted character
[Code]	<12>H
[Outline]	This command selects/deselects the inverted characters. Enter this command at the
	beginning of one line. Otherwise, it is overridden. Erect and inverted characters cannot be
	mixed in one line.

37 CITIZEN