Citizen Systems pmn manual ESC p m n1 n2

iDP3410 User's Manual

ESC "p" m n1 n2

[Function]	Specifying the pulse generation
[Code]	<1B>H <70>H m n1 n2
[Range]	0	≤ m ≤ 1
	0	≤ n1 ≤ n2 ≤ 255
[Outline]	This command outputs the signals specified with n1 and n2 to the connector pins.
		m	Connector Pin

0Drawer kick connector No. 2 pin

1Drawer kick connector No. 5 pin

	The ON time is n1×2 mS and the OFF time is n2×2 mS.
[Caution]	The user should consider driving the drawer at the following duty ratio.
	ON time ÷ (ON time + OFF time) ≤ 0.2
	(It is recommended to make n2 four times higher or more than n1.)
	The drawer kick-out solenoid should have a resistance value of 36Ω or more. Do not use a
	lower one because an overcurrent will flow. For the drawer power, be sure to use the
	printer power (Drawer kick-out connector No. 4 pin).

95 CITIZEN