
| iDP3410 User's Manual |
ESC "*" n1 n2 |
|
[Function] | Specifying the bit image mode |
[Code] | <1B>H <2A>H n1 n2 |
[Range] | 1 ≤ n1 + 256 × n2 ≤ 378 |
[Outline] | This command allows printing in the bit image mode. Divide the number of dots printed |
| by 256 and assume its quotient to be n2 and remainder to be n1. Therefore, the number of |
| horizontal dots will be n1 + 256 × n2. |
| If the bit image data is entered beyond the dot positions printable in one line, the surplus |
| data will be discarded. Normal data processing is restored after bit image printing. |
| Printing is done in a single direction. |
ESC "-" n
[Function] | Specifying/Canceling the underline |
[Code] | <1B>H <2D>H n |
[Outline] | This command selects/deselects an underline. The underline is selected at n = 1 and |
| deselected at n = 0. |
[Default] | n = 0 |
ESC "1"
[Function] | Setting the |
[Code] | <1B>H <31>H |
[Outline] | This command sets the line feed width to 1/9 inch. |
39 | CITIZEN |