English

Installing/Wiring the camera

■Adjusting camera angle (example)

CAUTION

When the camera angle has been changed, the range displayed by the image on the monitor will change. Always confirm by direct observation when backing the vehicle.

Adjust the angle of

Adjust horizontal angle

brackets A+B as

required by the

while confirming image on

mounting position.

monitor.

6. WIRING

Wiring

1Lead the camera cable into the vehicle and align it along the vehicle weather stripping. Use the supplied cable holders as necessary to fix the wires in place and prevent them from being pinched in hinges or dampers.

Cable holders

2Using an optional extension cable, the camera cable can be installed under the vehicle floor (carpet) to connect to a Clarion rear-view monitor or independent power supply box (CAA-188).

Fix the cable with adequate looseness in this area to prevent it from being stretched or pinched in the hinge when

the rear gate is opened

and closed. Cable holders

Always introduce the cable into the vehicle from the bottom (floor) side. Introducing the cable from the door top or side may lead to penetration by water.

8 CC-2011E