4. OPERATION
Operation when using Clarion rear-view camera system
The
Troubleshooting
The following symptoms are not malfunctions. Before having the unit serviced, check the following points once more.
| Symptom | Reason | Solution |
No image | Wiring is incomplete or disconnected. | Check wiring once again and confirm |
|
| correct connections. |
|
|
|
| A fuse is burned out. | When using an independent power |
|
| supply box, check the fuse and, if |
|
| burned out, replace with a new one |
|
| of the same capacity (1 A). If the fuse |
|
| burns out repeatedly, consult your |
|
| dealer or nearest Clarion Service |
|
| Center. |
|
|
|
Poor image is | The lens cover is soiled. | Wipe lightly with a damp soft cloth. |
produced |
| Do not rub harshly with dry cloths |
|
| since scratches may be produced. |
|
|
|
| Sunlight or headlights from a vehicle | The image will return to normal when |
| in the rear are shining directly in the | the light striking the lens is removed. |
| camera. |
|
|
|
|
| The environment is too dark. | The image display will be poor at |
|
| night or in dim light. |
|
| The image will return to normal in |
|
| conditions of brighter illumination. |
|
|
|
| The level of illumination outside the | [When using a separate power |
| vehicle changed too abruptly. | supply box] |
| 1. When moving from a bright to a | • In auto mode |
| dark location (especially from | Stop the vehicle and set the |
| bright sunlight to shade), the | transmission to neutral, then once |
| image may appear excessively | again to reverse. |
| dark. | • In manual mode |
| 2. When moving from a dark to a | Press the AUTO/MANUAL switch to |
| bright location (especially from | set the unit to AUTO, then press once |
| shade into bright sunlight), the | again to set to MANUAL. If the |
| screen image may appear | transmission is in reverse, set it to |
| excessively bright. | neutral before pressing the switch. |
|
|
|
English