Wiring
Securely tighten the connectors.
CCD camera power supply box
or
Inside the vehicle
Monitor for Clarion
CCD camera
Exclusive waterproof relay cable (sold separately) | Outside the vehicle |
|
Note:
• See the Instruction Manual supplied with the monitor for information regarding wiring, operation, and composition of the monitor unit.
English
■Waterproof Connector Fastening Procedure and Cautions
1w Mark : Align the arrow marks on both connectors in order to connect the cable.
Exclusive waterproof | Camera cable (male) |
relay cable (female) |
|
2Hold the two connectors together and twist the ring on the camera cable’s connector as far as it will go.
Twist the ring in the direction of the arrow while holding both connectors together. 
CAUTION
Twist the yellow ring until there is no gap between the ring and the connector.
Should there be any gap between the ring and the connector, twist the ring to close it.
Gap