Setting Acoustic Features
4.Press the [a] or [d] button to select the speaker to adjust.
•FRONT HPF: high pass filter for front speakers
•CENTER HPF: high pass filter for the center speaker
•SRD HPF: high pass filter for the rear (surround) speakers
•
5.Turn the [ROTARY] knob clockwise or counterclockwise to select the frequency.
•In case of [FRONT HPF] and [SRD HPF], the frequency is 50 Hz, 80 Hz, 120 Hz and [THRGH] (no filter).
•In case of
6.Press the [ADJ] button to return to the original mode.
Adjusting speaker output level (SP-GAIN)
Use the
•The initial value is [0 dB].
•A speaker that was turned off in the Section “Turning speakers on or off
1.Press and hold the [ADJ] button for 1 second or longer to enter adjust mode.
2.Press the [a] or [d] button to change to the
3.Press the [ENT] button to display the adjustment item.
•In the adjustment mode, the test tone is output from the selected speaker.
4.Press the [a] or [d] button to select the speaker to adjust.
•
•CENTER: front center speaker
•
•SURROUND R: right rear (surround) speaker
•SURROUND L: left rear (surround) speaker
•
5.Turn the [ROTARY] knob clockwise or counterclockwise to adjust the gain.
•The adjustment range is
6.Press the [ADJ] button to return to the original mode.
Adjusting speaker delay time (DELAY)
The timing when the sound of each speaker reaches the listening position depends on speaker installation and the size of the car. Adjust the delay time of each speaker so that the sound of all speakers reach the listening position at the same time as the sound from the front speakers.
•The initial value is [0 ms].
•A speaker that was turned off in the Section “Turning speakers on or off
1.Press and hold the [ADJ] button for 1 second or longer to enter adjust mode.
2.Press the [a] or [d] button to change to the [DELAY E] display.
3.Press the [ENT] button to display the adjustment item.
4.Press the [a] or [d] button to select the speaker to adjust.
•
•
5.Turn the [ROTARY] knob clockwise or counterclockwise to select the delay time.
•The
•The
6.Press the [ADJ] button to return to the original mode.
English
DVH940 9