English
8. OPERATIONS
Basic Operations | Note:Be sure to read this chapter referring to the front diagrams of |
chapter “2. CONTROLS” on page 3. |
!CAUTION
Be sure to lower the volume before switching off the unit power or the ignition key. The unit remembers its last volume setting. If you switch the power off with the volume up, when you switch the power back on, the sudden loud volume may hurt your hearing and damage the unit.
Note:
•If the CD mode is selected when no disc is inserted, the display shows “NO DISC”.
Switching the display
Press the [D] button to select the desired display.
Each time you press the [D] button, the display switches in the following order:
Turning on/off the power
Note:
•Be careful about using this unit for a long time without running the engine. If you drain the carʼs battery too far, you may not be able to start the engine and this can reduce the service life of the battery.
1.Press the [SRC] button.
2.The illumination and display on the unit light up. The unit automatically remem- bers its last operation mode and will au- tomatically switch to display that mode.
3.Press and hold the [SRC] button for 1 second or longer to turn off the power for the unit.
Note:
•System check
The first time this unit is turned on after the wire connections are completed, it must be checked what equipment is connected. When the power is turned on, the “SYSTEM CHECK” appears in the display, then the unit returns to the clock display mode. The system check starts within the unit.
When the system check is complete, press the [SRC] button again.
Selecting a mode
1.Press the [SRC] button to change the operation mode.
2.Each time you press the [SRC] button, the op- eration mode changes in the following order:
Radio mode | CD/MP3/WMA mode | CD |
changer mode | DVD changer mode | TV |
mode AUX mode Radio mode... |
| |
∗External equipment not connected with CeNET is not displayed.
•Main display
•Title display
∗In the case of a user title, only the top level is displayed.
∗In the case of radio/TV/AUX/DVD changer, the display cannot be switched to “Title Display”.
∗Once selected, the preferred display becomes the display default. When a function adjustment such as volume is made, the screen will momentarily switch to that functionʼs display, then revert back to the preferred display several seconds after the adjustment.
∗If the button operation is performed with the screen saver function on, the operation display corre- sponding to the button operation is shown for about 30 seconds and the display returns to the screen saver display.
For details, refer to the subsection “Turning the screen saver function on or off” in section “Operations Common to Each Mode”.
∗When you have entered a title in a CD/MP3/WMA, it appears in the title display. If you have not en- tered a title, “NO TITLE” appears in the title display instead.
For information on how to enter a title, refer to the subsection “Entering titles” in section “Operations Common to Each Mode”.
12 DXZ466MP