Basic Operations

Adjusting the volume

Adjusting the balance

English

1.Press the front part of the [ROTARY] knob. The knob will pop up.

2.Turning the [ROTARY] knob clockwise increases the volume; turning it counter- clockwise decreases the volume.

∗The volume level is from 0 (minimum) to 33 (maximum).

1.Press the [A-M] button and select “BALANCE 0”.

2.Turning the [ROTARY] knob clockwise empha- sizes the sound from the right speaker; turning it counterclockwise emphasizes the sound from the left speaker.

∗The factory default setting is “0”. (Adjustment range: L13 to R13)

Audio mode adjustments

1.Press the [A-M] button to select the adjustment

mode. The mode switches as follows each time the [A-M] button is pressed:

BASS TREBLE BALANCE FADER Previous mode

2.Turning the [ROTARY] knob to adjust the se- lected audio mode.

BASS (Bass) : Adjustment range : -6 to +7

TREBLE (Treble) : Adjustment range : -6 to +6

BALANCE (Balance) : Adjustment range : L13 to R13

FADER (Fader) : Adjustment range : F12 to R12

∗The display returns to the previous mode 7 seconds after the adjustment.

Adjusting the bass

1.Press the [A-M] button and select “BASS 0”.

2.Turning the [ROTARY] knob clockwise em- phasizes the bass; turning it counterclockwise attenuates the bass.

∗The factory default setting is “0”. (Adjustment range: -6 to +7)

Adjusting the treble

1.Press the [A-M] button and select “TREBLE 0”.

2.Turning the [ROTARY] knob clockwise empha- sizes the treble; turning it counterclockwise attenuates the treble.

∗The factory default setting is “0”. (Adjustment range: -6 to +6)

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting the fader

1.Press the [A-M] button and select “FADER 0”.

2.Turning the [ROTARY] knob clockwise em- phasizes the sound from the front speakers; turning it counterclockwise emphasizes the sound from the rear speakers.

∗The factory default setting is “0”. (Adjustment range: F12 to R12)

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Setting the Z-Enhancer

This unit are provided with 3 types of sound tone effects stored in memory. Select the one you prefer.

∗The factory default setting is “Z-ENHANCER OFF”.

Each time you press the [Z] button, the tone effect changes in the following order:

“OFF” “BASS BOOST” “IMPACT”

“EXCITE” “OFF” ...

• BASS BOOST: bass emphasized

• IMPACT

: bass and treble emphasized

•

EXCITE

: bass and treble emphasized

 

 

mid de-emphasized

•

OFF

: no sound effect

DXZ466MP 13