Operations Common to Each Mode

English

Adjusting the display scroll speed

 

This feature allows you to slow down the scroll speed when the scroll speed is too fast, making it difficult to view the screen.

The factory default setting is “SPEED 3

2-1. Select “ SCRL SPEED”.

3-1.Turn the [ROTARY] knob to select the setting.

This setting item can be adjusted within the range SPEED 1 to SPEED 6.

Adjust this setting item while viewing how the appearance of the display changes.

• Dimmer control

You can setting the dimmer control “ON” or “OFF”.

The factory default setting is “ON”.

2-1. Select “ DIMMER”.

3-1. Turn the [ROTARY] knob to select “ON” or “OFF”.

• Adjusting the display contrast

You can adjust the display contrast to match the angle of installation of the unit.

The factory default setting is “08”. (Adjustment level: 01 to 16)

2-1. Select “ CONTRAST”.

3-1. Turn the [ROTARY] knob to adjust the contrast.

To change other settings

1.Press the [ADJ] button to switch to the adjustment selection display.

2. Press the [

 

,

 

 

 

] lever upward or down-

 

 

ward to select the “item name”.

Each time the [

 

 

,

 

] lever is pressed

 

 

up/down, the item display changes in the

following order:

 

BLINK LED

AMP CANCEL

AUX SENS” “SYSTEM CHECK Push ENT

3.Turn the [ROTARY] knob to select the “desired setting item”.

After completing settings, press the [ADJ] but- ton to return to the previous mode.

Anti-theft indicator

The red Anti-theft indicator is a function for preventing theft. When the DCP is removed from the unit, this indicator blinks.

The factory default setting is “OFF”.

2-1. Select “ BLINK LED”.

3-1. Turn the [ROTARY] knob to select “ON” or “OFF”.

Setting the external amplifier

The factory default setting is “OFF”.

2-1. Select “ AMP CANCEL”.

3-1. Turn the [ROTARY] knob to select “ON” or “OFF”.

• ON:

Use with connected AMP.

• OFF:

Use with inside AMP.

• Selecting AUX IN sensitivity

Make the following settings to select the sensitivity when sounds from external devices connected to this unit are difficult to hear even after adjusting the volume.

The factory default setting is “MID”.

2-1.

Select “ AUX SENS”.

3-1.

Turn the [ROTARY] knob to select “LOW”,

 

MID” or “HIGH”.

Triggered audio mute for cellular telephones

This unit requires special wiring to mute the audio signal automatically when a cellular telephone rings in the car.

This function is not compatible with all cellular telephones. Contact your local authorized Clarion dealer for information on proper installation and compatibility.

Performing a system check

This function allows you to perform a system check from the adjust mode when required.

2-1. Select “ SYSTEM CHECK Push ENT ”.

3-1. Press and hold the [ ] button for 1 second or longer.

SYSTEM CHECK” appears in the display, then the unit returns to the previous operation mode.

22 DXZ466MP