CD/MP3/WMA Mode Operations

1.Types of recording that can be played are as follows.

Disc

Setting

Set to CD

Set to MP3/WMA

Mixed with CD

Play CD

Play MP3/WMA

and MP3/WMA

 

 

type tracks

 

 

 

CD type track only

Play CD

Play CD

MP3/WMA type

Play MP3/

Play MP3/WMA

track only

 

WMA

 

2.After making these settings, remove the disc and then reinsert it.

3.When a mixed mode CD is loaded and CD is set, the track to be played first is MP3/WMA file data and no sound is heard.

Note:

•When playing a CCCD (Copy Control CD), set the setting to CD type. When this is set to MP3/WMA type, the CD cannot be played normally in some cases.

Disc-In-Play function

As long as the ignition key is turned to the ON or ACC position, this function allows you to turn the power to the unit and start playing the disc automatically when the disc is inserted even if the power is not turned on.

!CAUTION

•Do not try to put your hand or fingers in the disc insertion slot. Also never insert foreign objects into the slot.

•Do not insert discs where adhesive comes out from cellophane tape or a rental CD label, or discs with marks where cellophane tape or rental CD labels were removed. It may be impossible to extract these discs from the unit and they may cause the unit to break down.

Backup eject function

Just pressing the [] button ejects the disc even if the power to the unit was not turned on.

1.Press the [OPEN] button to open the FLIP DOWN PANEL.

Note:

•If the FLIP DOWN PANEL will not open far enough, open it gently with your hand.

2.Press the [ ] button. Remove the disc after it is ejected.

3.Close the FLIP DOWN PANEL.

Notes:

•Always close the FLIP DOWN PANEL once you take out the disc.

•If you force a CD into before auto reloading, this can damage the CD.

•If a CD (12 cm) is left in the ejected position for 15 seconds, the CD is automatically reloaded. (Auto reload).

•8 cm CDs are not auto reloaded. Be sure to remove it when ejected.

Listening to a disc already loaded in the unit

Press the [SRC] button to select the CD/MP3/ WMA mode.

When the unit enters the CD/MP3/WMA mode, play starts automatically.

If there is no disc loaded, the indication “NO DISC” appears in the title display.

∗The mode changes each time the [SRC] button is pressed. (Modes are not displayed for equipment that is not connected.)

Radio CD/MP3/WMA (CD changer)

(DVD changer) (TV) AUX Radio...

Loading a CD

1.Press the [OPEN] button to access the CD SLOT behind the FLIP DOWN PANEL.

2.Insert a CD into the center of the CD SLOT with the labeled side facing up. The CD plays automatically after loading.

Notes:

•Never insert foreign objects into the CD SLOT.

•If the CD is not inserted easily, there may be an- other CD in the mechanism or the unit may require

service.

•Discs not bearing the or mark and CD-ROMs cannot be played by this unit.

•Some CDs recorded in CD-R/CD-RW mode may not be usable.

English

DXZ466MP 17