Clarion DXZ466MP Operations Common to Each Mode, To change display setting, off, OFF, CLOCK, CLOCK, • ON:, ROTARY, ROTARY, ROTARY, ROTARY, ROTARY, ROTARY, • OFF:, MESSAGE”

Operations Common to Each Mode

To change display setting

1.Press and hold the [D] button for 1 second or longer to switch to the adjustment selection display.

2. Press the [ , ] lever upward or downward

to select the “item name”.

“CLOCK Push ENT ”

“SCREEN SVR Push ENT ”

“MSG INPUT Push ENT ”

“AUTO SCROLL” “DIMMER”

“CONTRAST”

3.Turn the [ROTARY] knob to select the “desired setting value”.

∗After completing settings, press the [D] button to return to the previous mode.

• Setting the clock

2-1.	Select “ CLOCK					”.
				Push ENT
3-1.	Press the [		] button.
3-2. Press the [		,			] lever upward or

downward to select the hour or the minute.

3-3. Turn the [ROTARY] knob to set the correct time.

∗The clock is displayed in 12-hour format.

3-4. Press the [ ] button to store the time into memory.

Note:

•You cannot set the clock when it is displayed with only the ignition on. If you drain or remove the carʼs battery or take out this unit, the clock is reset. While setting the clock, if another button or operation is selected, the clock set mode is canceled.

•Turning the screen saver function on or

off

This unit is provided with the screen saver function which allows you to show various kinds of patterns and characters in the operation status indication area of the display in a random order. You can turn on and off this function.

If the button operation is performed with the screen saver function on, the operation display corresponding to the button operation is shown for about 30 seconds and the display returns to the screen saver display.

∗The factory default setting is “Pattern SS”. 2-1. Select “ SCREEN SVR Push ENT ”.

3-1. Turn the [ROTARY] knob to select the setting.

Each time you turn the [ROTARY] knob, the setting changes in the following order:

“Pattern OFF” “Pattern SS” “Pattern

MESSAGE”

•Entering MESSAGE INFORMATION

Message up to 30 characters long can be stored in memory and displayed as a type of screen saver setting.

∗The factory default setting is “WELCOME TO CLARION”.

2-1.	Select “ MSG INPUT					”.
					Push ENT
3-1.	Press the [		] button.
3-2.	Press and hold [BND] button for 1 second or
	longer to clear the old message.
3-3. Press the [		,		] lever upward or down-
	ward to move the cursor.

3-4. Press the [BND] button to select a character. Each time you press the [BND] button, the character changes in the following orders:

Capital letters Small letters Numbers/ Symbols Umlaut Capital letters...

3-5. Turn the [ROTARY] knob to select the desired character.

3-6. Repeat step 3-3 to 3-5 to enter up to 30 characters for message.

3-7. Press and hold the [ ] button for 2 seconds or longer to store the message in memory and cancel input message mode.

∗Press and hold the [BND] button for 1 second or longer to cancel the input message. Then

press and hold the [ ] button for 2 seconds or longer to store the message and the message return to default setting.

• Setting the method for title scroll

Set how to scroll in CD-TEXT, MP3/WMA title.

∗The factory default setting is “ON”. 2-1. Select “ AUTO SCROLL”.

3-1. Turn the [ROTARY] knob to select “ON” or “OFF”.

• ON:

To scroll automatically.

• OFF:

To scroll just 1 time when the title was changed or the [T] button was pressed for 1 second or longer.

English

DXZ466MP 21