5. OPERATIONS

Note:

• Be sure to read this chapter referring to the front diagrams of chapter “CONTROLS” on page ii (unfold).

Basic Operations

English

CAUTION

Be sure to lower the volume before switching off the unit power or the ignition key. The unit remembers its last volume setting. If you switch the power off with the volume up, when you switch the power back on, the sudden loud volume may hurt your hearing and damage the unit.

Turning on/off the power

Note:

•Be careful about using this unit for a long time without running the engine. If you drain the car’s battery too far, you may not be able to start the engine and this can reduce the service life of the battery.

1.Press the [SRC] button.

The mode that was previous active is displayed.

2.Press and hold the [SRC] button for 1 second or longer to turn off the power for the unit.

Note:

•The first time this unit is turned on after the wire connections are completed, it must be checked what equipment is connected. When the power is turned on, the “SYSTEM CHECK” appears in the display. The system check starts within the unit. When the system check is complete, the unit returns to the radio mode.

Selecting a mode

1.Press the [SRC] button to change the operation mode.

2.Each time you press the [SRC] button, the operation mode changes in the following order:

Radio ➜ (DAB) ➜ CD/MP3/WMA/AAC ➜ USB ➜ (iPod BB) ➜ (CD changer) ➜ (DVD changer) ➜ (TV) ➜ AUX ➜ Radio...

∗External equipment not connected with CeNET is not displayed.

Adjusting the volume

1.Press the [+] or [–] button to adjust the volume.

∗The volume level is from 0 (minimum) to 33 (maximum).

Switching the display

1.Press the [D] button to select the desired display.

∗When CT data is not received, “CT– –:––” appears in the display.

DXZ578RUSB 11