CD/MP3/WMA/AAC Operations

●Number of files or folders

1.Up to 255 files can be recognized per folder. Up to 510 files can be played.

2.Tracks are played in the order that they were recorded onto a disc. (Tracks might not always be played in the order displayed on the PC.)

3.Some noise may occur depending on the type of encoder software used while recording.

Set the type of file to be played (multi-session function)

When a single disc holds both normal CD type tracks and MP3/WMA/AAC type tracks, use this command to select which type of track to play.

∗Default setting is “CD”.

•When only one type of track (either music CD or MP3/WMA/AAC) is recorded on a disc, selecting either type will allow playback of the disc.

•When playing CCCD (copy-control CDs), set to CD type.

1.Press the [OPTION] button.

2.Push the [SEEK PANEL] leftward or rightward to select “M-SESS”.

3.Press the [UP] or [DN] button to select “CD” or “MP3”. The mixed mode is switched between CD type or MP3/WMA/AAC type.

• CD

When playing music CD only.

• MP3

When playing music MP3/WMA/AAC only.

4.When setting is completed, remove the disc and reinsert it.

Backup Eject function

Just pressing the [Q] button, ejects the disc even if the power to the unit was not turned on.

1.Press the [OPEN] button to open the FLIP DOWN PANEL.

Note:

•If the FLIP DOWN PANEL will not open far enough, open it gently with your hand.

2.Press the [Q] button. Remove the disc after it is ejected.

3.Close the FLIP DOWN PANEL.

∗ Press the center of the DCP to close.

Notes:

•Always close the FLIP DOWN PANEL once you take out the disc.

•If you force a CD into before auto reloading, this can damage the CD.

•If a CD (12 cm) is left in the ejected position for 15 seconds, the CD is automatically reloaded (Auto reload).

Listening to a disc already loaded in the unit

Press the [SRC] button to select the CD/MP3/ WMA/AAC mode.

When the unit enters the CD/MP3/WMA/AAC mode, play starts automatically.

If there is no disc loaded, the indication “NO DISC” appears in the title display.

Loading a CD

1.Press the [OPEN] button to access the CD SLOT behind the FLIP DOWN PANEL.

2.Insert a CD into the center of the CD SLOT with the labeled side facing up. The CD plays automatically after loading.

Notes:

•Never insert foreign objects into the CD SLOT.

•If the CD is not inserted easily, there may be

another CD in the mechanism or the unit may require service.

•Discs not bearing the or mark and CD-ROMs cannot be played by this unit.

•Some CDs recorded in CD-R/CD-RW mode may not be usable.

3.Close the FLIP DOWN PANEL.

∗ Press the center of the DCP to close.

CAUTION

Be careful not to catch your hand or fingers while closing the FLIP DOWN PANEL.

Notes:

•If the FLIP DOWN PANEL does not open fully, gently open with your hand.

•After loading a CD, always close the FLIP DOWN PANEL.

Pausing play

1. Press the [

 

 

 

] button to pause play.

 

 

“PAUSE” appears in the display.

2. To resume CD play, press the [

 

 

 

]

 

 

button again.

 

 

 

 

English

DXZ578RUSB 21