Radio Operations
Manual memory | Preset scan |
English
1.Select the desired station with seek tuning or manual tuning.
2. Press the [ |
|
|
|
|
|
| ] button to enter the |
|
| ||||||
preset memory |
|
|
| mode. Press the [UP] or [DN] | |||
button to select a desired station, then press | |||||||
and hold the [ |
|
|
|
|
| ] button for 2 seconds | |
|
|
|
| ||||
or longer to store the current station into preset memory.
Preset scan receives the stations stored in preset memory in order. This function is useful when searching for a desired station in memory.
1.Press the [OPTION] button.
2.Push the [SEEK PANEL] leftward or rightward to select “PRESET SCN”.
3. Press the [ |
|
|
| ] button. |
|
|
∗When a desired station is tuned in, press the
Auto store | [ |
|
|
| ] button again to continue receiving |
|
| ||||
that |
|
| station. | ||
Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially. If 6 receivable stations cannot be received, a previously stored station remains unoverwritten at the memory position.
1.Press the [MENU] button and select the desired band (FM or AM (MW/LW)).
2.Press the [OPTION] button.
3.Push the [SEEK PANEL] leftward or rightward to select “AUTO STORE”.
4. Press and hold the [ ] button for 2
seconds or longer. The stations with good reception are stored automatically to the preset channels.
∗If auto store is performed in the FM bands, the stations are stored in FM3 even if FM1 or FM2 was chosen for storing stations.
16 DXZ578RUSB