Basic Operations
●Q curve
The Q curve becomes sharper when the numerical value is increased, and smoother when the numerical value is decreased.
Flat frequency characteristics can be made by selecting a Q curve opposite to that of the curve to be compensated.
Q curve : 20 Q curve : 1
●Adjusting the bass
The bass gain, bass FREQ (center frequency) and bass Q can be adjusted as follows.
The adjustment can only be performed when the DZE is set to “DZE OFF”.
“B GAIN” ↔ “B FREQ” ↔ “B Q”
B GAIN:
BFREQ: 50Hz/80Hz/120Hz (The factory default setting is “50”)
B Q: 1/1.25/1.5/2 (The factory default setting is “1”)
|
|
|
| ] button to return to the | |
|
| ||||
previous mode. |
|
●Adjusting the treble
The treble gain and treble FREQ (center frequency) can be adjusted as follows.
The adjustment can only be performed when the DZE is set to “DZE OFF”.
|
|
| ] button. | |
|
|
“T GAIN” ↔ “T FREQ”
T GAIN:
T FREQ: 8KHz/12KHz (The factory default setting is “12K”)
|
|
|
| ] button to return to the | |
|
| ||||
previous mode. |
|
●Adjusting the sound restorer
The sound restorer enriches the playback of all types of music files that have undergone any level of data compression.
∗The factory default setting is “OFF”.
Each time you press the [UP] or [DN] button, the sound restorer changes in the following order:
“OFF” ↔“1” ↔ “2” ↔ “3”
Set this adjustment in accordance with the music source used.
OFF: For music sources compressed at high bit rate
1:For music sources compressed for high quality at low bit rate
2:For music sources compressed for standard quality at low bit rate
3:For music sources compressed for low quality at low bit rate
●Setting high pass filter
“THROUGH” ↔ “50Hz” ↔ “80Hz” ↔ “120Hz”
∗The factory default setting is “THROUGH” (through).
●Setting low pass filter
Each time you press the [UP] or [DN] button, the setting changes in the following order:
“THROUGH” ↔ “50Hz” ↔ “80Hz” ↔ “120Hz”
∗The factory default setting is “THROUGH” (through).
English
DXZ578RUSB 13