Operations Common to Each Mode
●Setting the dimmer control
You can set the dimmer control “HIGH”, “MID”, “LOW” or “OFF”.
∗The factory default setting is “MID”.
●
The red
∗The factory default setting is “OFF”.
●Setting the external amplifier
∗The factory default setting is “OFF”.
• ON:
Use with connected AMP.
• OFF:
Use with inside AMP.
●Set the cellular phone connection
mode (AUX/TEL)
You can listen to your telephone calls from the speakers connected to this unit.
∗The factory default setting is “AUX”.
• AUX:
When you select “AUX”, the AUX input cable is used to connect a AUX BLUETOOTH BB (BLT373) (sold separately).
• TEL:
●Setting the car speaker output for the
cellular phone
∗The factory default setting is “R”.
∗To output the telephone calls, set the cellular phone interrupt to ON.
• R:
Telephone calls can be heard on the front right speaker connected to this unit.
• L:
Telephone calls can be heard on the front left speaker connected to this unit.
●Cellular phone interrupt setting
If you connect this unit and your cellular phone with a separately sold cable, you can listen to your telephone calls on your car speakers.
∗The factory default setting is “OFF”.
“OFF” ↔ “ON” ↔ “MUTE”
• OFF:
This unit continues normal operation even when the cellular phone is used.
• ON:
You can listen to your telephone calls from the speakers connected to this unit.
∗When listening to your calls on your car speakers, you can adjust the volume by pressing the [UP] or [DN] button.
• MUTE:
The sound from this unit is muted during telephone calls.
Note:
•If connecting a
English
When you select “TEL”, the CENET input cable is used to connect a cellular phone (BLT433 or
●Performing a system check
“SYSTEM CHECK” appears in the display, then the unit returns to the previous operation mode.
DXZ578RUSB 25