Operations Common to Each Mode
Entering MESSAGE INFORMATION | Setting the method for title scroll |
Message up to 30 characters long can be stored in memory and displayed for CD, CD changer and TV stations.
∗The factory default setting is “Welcome to Clarion”.
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button to select “MSG INPUT ”.
3.Press the [ ] button.
4.Press the [a] or [d] button to move the cursor.
5.Press the [D] button to select a character. Each time you press the [D] button, the character changes in the following orders:
Numbers ➜ Symbols ➜ Umlaut ➜ Capital letters ➜ Numbers…
6.Turn the [ROTARY] knob clockwise or counterclockwise to select the desired character.
7.Repeat step 4 to 6 to enter up to 30 characters for message.
8.Press and hold the [ ] button for 2 seconds or longer to store the message in memory and cancel input message.
Message display
When the unit is powered on or off, a message is displayed. The user can turn this message display ON or OFF.
∗The factory default setting is “ON”.
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button to select “MES- SAGE”.
3.Turn the [ROTARY] knob clockwise or coun- terclockwise to set the message display “ON” or “OFF”.
4.Press the [T] button to return to the previous mode.
Set how to scroll in
∗The factory default setting is “ON”.
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button to select “AUTO SCROLL”.
3.Turn the [ROTARY] knob clockwise or coun- terclockwise and select “ON” or “OFF”.
●ON:
To scroll automatically.
●OFF:
To scroll just 1 time when the title was changed or the title key was pressed.
4.Press the [T] button to return to the previous mode.
Dimmer level
1.Press the [T] button for 1 second or longer to enter ADJ mode.
2.Press the [a] or [d] button to select the “DIMMER LV”.
3.Turn the [ROTARY] knob clockwise or coun- terclockwise to adjust Dimmer level.
4.Press the [T] button to return to the previous mode.
∗Adjustment range is OFF to LV5.
∗Factory default setting is LV3.
Adjusting the display contrast
You can adjust the display contrast to match the angle of installation of the unit.
∗The factory default setting is “8”. (Adjustment level:1to 18)
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button to select “CONTRAST”.
3.Turn the [ROTARY] knob clockwise or coun- terclockwise to adjust the contrast.
4.Press the [T] button to return to the previous mode.
English
DXZ835MP 21