Clarion DXZ835MP Radio Operations, Adjusting the Beat EQ, Adjusting MAGNA BASS EXTEND, Tuning

English	Basic Operations
	3. When the adjustment is complete, press the
	[A-M] button several times until the function
	mode is reached.

Adjusting the Beat EQ

1.Press the [BEQ] button and select the Beat EQ mode (1 to 3) to adjust.

2.Press the [A-M] button and select “BASS BOOST or IMPACT or EXCITE”.

3.Turning the [ROTARY] knob clockwise adjusts in the + direction; turning it counterclockwise adjusts in the – direction.

∗When BASS BOOST is selected, you can adjust the bass in the range of –3 to 3.

∗When IMPACT and EXCITE is selected, you can adjust the bass and treble in the range of –3 to 3.

4.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting MAGNA BASS EXTEND

The MAGNA BASS EXTEND does not adjust the low sound area like the normal sound adjustment function, but emphasizes the deep bass sound area to provide you with a dynamic sound.

∗ The factory default setting is off.

1.Press and hold the [A-M] button for 1 sec- ond or longer to turn on the MAGNA BASS EXTEND effect. “M-B EX” lights in the dis- play.

2.Press and hold the [A-M] button for 1 second or longer to turn off the MAGNA BASS EX- TEND effect. “M-B EX” goes on in the dis- play.

Adjusting the subwoofer output volume

∗The factory default setting is “S-VOL 0”. (Ad- justment range: –6 to +6)

1.	Press the [SW-VOL] button to select the
	subwoofer volume increases or decreases.
2.	Press and hold the [SW-VOL] button, the
	subwoofer volume automatically increases or
	decreases.

Radio Operations

FM reception

For enhanced FM performance the ® tuner includes signal actuated stereo control, Enhanced Multi AGC, Impulse noise reduction curcuits and Multipath noise reduction circuits.

Changing the reception area

This unit is initially set to USA frequency intervals of 10kHz for AM and 200kHz for FM. When using it outside the USA, the frequency reception range can be switched to the intervals below.

●Setting the reception area

1.Press the [BND] button and select the de- sired radio band (FM or AM).

2.While pressing the [A-M] button and hold the number “2” of the [DIRECT] buttons for 2 seconds or longer, the reception area switches from inside the USA to outside the USA.

3.While pressing the [A-M] button and hold the number “1” of the [DIRECT] buttons for 2 seconds or longer, the reception area switches from outside the USA to inside the USA.

∗Any station preset memories are lost when the reception area is changed.

Listening to the radio

1.Press the [FNC] button and select the radio mode. The frequency in the display.

2.Press the [BND] button and select the radio band. Each time the button is pressed, the ra- dio reception band changes in the following order:

FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...

3.Press the [a] or [d] button to tune in the desired station.

Tuning

There are 3 types of tuning mode available, seek tuning, manual tuning and preset tuning.

Seek tuning

1.Press the [BND] button and select the de- sired band (FM or AM).

∗If “MANU” is lit in the display, press and hold the [BND] button for 1 second or longer. “MANU” in the display goes off and seek tun- ing is now available.

14 DXZ835MP