CD Operations
Random play | 1. | Press the [RDM] button. |
Random play selects and plays individual tracks | 2. | To cancel the random play, press the [RDM] |
on a disc in no particular order. This function |
| button again. |
continues automatically until it is cancelled. |
|
|
English
Operations Common to Each Mode
Setting the clock
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button to select “CLOCK”.
3. Press the [ | ] button. |
4.Press the [a] or [d] button to select the hour or the minute.
5.Turn the [ROTARY] knob to set the correct time.
∗ The clock is displayed in
2.Press the [a] or [d] button to select “SCRN SVR”.
3. Press the [ | ] button. |
4.Turn the [ROTARY] knob to select the setting. Each time you turn the [ROTARY] knob, the setting changes in the following order:
OFF ➜ SS ➜ MESSAGE
5. Press the [ | ] button to store the setting. |
6.Press the [T] button to return to the previous mode.
6. Press the [ ] button to store the time into memory.
7.Press the [T] button to return to the previous mode.
Note:
•You cannot set the clock when it is displayed with only the ignition on. If you drain or remove the boat’s battery or take out this unit, the clock is reset. While setting the clock, if another button or operation is selected, the clock set mode is canceled.
Turning the screen saver function on or off
This unit is provided with the screen saver function which allows you to show various kinds of patterns and characters in the Operation Status indication area of the display in a random order. You can turn on and off this function.
If the button operation is performed with the screen saver function on, the operation display corresponding to the button operation is shown for about 30 seconds and the display returns to the screen saver display.
∗The factory default setting is “OFF”.
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
Entering MESSAGE INFORMATION
Message up to 30 characters long can be stored in memory and displayed for any mode.
∗The factory default setting is “WELCOME TO CLARION”.
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button to select “INPUT”.
3. Press the [ | ] button. |
4.Press the [BND] button to clear the old message.
5.Press the [a] or [d] button to move the cursor.
6.Press the [DISP] button to select a character. Each time you press the [DISP] button, the character changes in the following orders: Numbers ➜ Symbols ➜ Capital letters ➜
Numbers…
7.Turn the [ROTARY] knob to select the desired character.
8.Repeat step 5 to 7 to enter up to 30 message characters.
9. Press and hold the [ ] button for 2 seconds or longer to store the message in memory and cancel the input message.
10.Press the [T] button to return to the previous mode.
M455 17