Basic Operations

• B-BOOST

: bass emphasized

• IMPACT

: bass and treble

 

emphasized

• EXCITE

: bass and treble

 

emphasized mid de-

 

emphasized

• CUSTOM

: user custom

• Z+ OFF

: no sound effect

Adjusting the Z-Enhancer Plus

1.Press the [Z+] button and select the Z- Enhancer Plus mode to adjust.

2.Press the [A-M] button and turning the

[ROTARY] knob clockwise adjusts in the + direction; turning it counterclockwise adjusts in the – direction.

●When “B-BST 0” is selected, you can adjust the bass in the range of –3 to 3.

●When “IMPACT 0” is selected, you can ad- just the bass and treble in the range of –3 to 3.

●When “EXCITE 0” is selected, you can adjust the bass and treble in the range of –3 to 3.

●When “CUSTOM” mode is selected, bass gain, frequency and Q-curve, and treble gain and frequency can be adjusted.

∗Press and hold the [Z+] button for 1 second or longer, then the setting parameter of bass/ treble will be initialized with a display “Z+FLAT”.

Note:

•If the rear line level output is set to the full range “REAR” setting, “S-VOL” will not be shown as a selection.

Adjusting the bass

(Gain, Frequency, Q-curve)

This adjustment can be performed when the Z-Enhancer Plus is set to “CUSTOM”.

1.Press the [A-M] button and select “BASS”.

2.Turning the [ROTARY] knob clockwise emphasizes the bass; turning it counterclockwise attenuates the bass.

∗The factory default setting is “B<G 0>”. (Adjustment range: –6 to +6)

3.Press the [a] or [d] button to select “B<F 60>”.

Turn the [ROTARY] knob to select the frequency.

∗The factory default setting is “B<F 60>”. (Adjustment 60/100/200 Hz)

4.Press the [a] or [d] button to select “B<Q 1>”.

Turn the [ROTARY] knob to select the Q- curve.

∗The factory default setting is “B<Q 1>”. (Adjustment 1/1.25/1.5/2)

5.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

English

Adjusting the tone

Press the [A-M] button and select the item to adjust. Each time you press the [A-M] button, the item changes as following order:

●When “B-BOOST” is set

“S-VOL 0” ➜ “B-BOOST” ➜ “BAL 0” ➜ “FAD 0” ➜ Last function mode.

●When “IMPACT” is set

“S-VOL 0” ➜ “IMPACT” ➜ “BAL 0” ➜ “FAD 0” ➜ Last function mode.

●When “EXCITE” is set

“S-VOL 0” ➜ “EXCITE” ➜ “BAL 0” ➜ “FAD 0” ➜ Last function mode.

●When “CUSTOM” is set

“S-VOL 0” ➜ “BASS” ➜ “TREBLE” ➜ “BAL 0” ➜ “FAD 0” ➜ Last function mode.

●When “Z+ OFF” is set

“S-VOL 0” ➜ “BAL 0” ➜ “FAD 0” ➜ Last function mode.

Adjusting the treble (Gain, Frequency)

This adjustment can be performed when the Z- Enhancer Plus is set to “CUSTOM”.

1.Press the [A-M] button and select “TREBLE”.

2.Turning the [ROTARY] knob clockwise emphasizes the treble; turning it counterclockwise attenuates the treble.

∗The factory default setting is “T<G 0>”. (Adjustment range: –6 to +6)

3.Press the [a] or [d] button to select “T<F 10>”.

Turn the [ROTARY] knob to select the frequency.

∗The factory default setting is “T<F 10>”. (Adjustment 10 kHz/15 kHz)

4.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

M455 13