Sirius Satellite Radio Operations

Switching the display

Manual tuning

English

1.Press the [DISP] button to select the sub display.

2.In the sub display, press and hold the [DISP] button for 1 second or longer to cycle between the following display modes:

Channel name ➜ title ➜ artist name ➜ category name ➜ text ➜ channel name

➜…

Notes:

•The Operation status indication of the source unit displays the abbreviated channel name for 2 seconds when a station is selected before returning to the previous display mode.

•Scrolling starts when the channel name or other text has been displayed for 2 seconds. When scrolling finishes, the first text display appears. To start scrolling again, press the [T] button.

Channel selection

Channels are selected with the following buttons.

•The [a] or [d] button

•The [DIRECT] buttons

•The [ ] button

•The [P/A] button

∗For details, see the following operation descriptions.

Note:

•The audio output is muted and other button operations are not accepted during channel selection.

Any channel including channels without broadcasts and channels not covered by the contract can be selected during manual tuning.

1.Press and hold the [BND] button for 1 second or longer.

∗This changes the seek mode to manual mode and the “MANU” indicator on the display lights. When this operation is performed in manual mode, the seek mode is engaged and the “MANU” indicator on the display goes off.

Note:

•The receiver automatically reverts to the seek mode when the [a] or [d] button is not used for 7 seconds in the manual mode.

2.Press the [a] or [d] button. The receiver moves to channels above or below the current channel one by one.

3.Press and hold the [a] or [d] for 1 second or longer.

The receiver moves to seek channels below or above the current channel and the channel found when either button is released is received.

Recalling a preset channel

A total of 18 SIRIUS channels can be stored (6- SR1, 6-SR2 and 6-SR3). This allows you to select your favorite SIRIUS channels and store them in memory for later recall.

1.Press the [BND] button and select the desired SIRIUS band (SR1, SR2 or SR3).

Tuning

There are 3 types of tuning mode available, seek tuning, manual tuning and preset tuning.

Seek tuning

Only channels that can be received are selected while channels without broadcasts and channels not covered by the contract are automatically skipped.

1.Press the [a] or [d] button.

The receiver seeks the next available channel below or above the current channel.

2.Press and hold the [a] or [d] button.

The receiver moves to seek channels below or above the current channel. If the channel found when either button is released is available that channel is received. Otherwise, seeking continues until an available channel is found.

2.To recall a stored SIRIUS channel, press the desired [DIRECT] button to select that channel.

∗Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the current channel into preset memory.

Manual memory

1.Select the desired channel with seek tuning, manual tuning or preset tuning.

2.Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the current channel into preset memory.

Notes:

•When the name of a channel stored in memory is changed by a broadcasting channel, the display may show a channel name that differs from the stored name.

•A channel stored in memory may be discontinued at the option of the broadcasting channel.

20 M455