Installing the Main Unit in a TOYOTA Vehicle
Install by using parts attached to the vehicle. (Screws marked * are attached to the vehicle.)
Center Panel | ' | |
(1 pair for the left | ||
(* 2) | ||
and right sides) | ||
|
Figure 7
Note:
*2: Some panel openings are too small for the unit depending on the vehicle type and model. In such a case, trim the upper and lower sides of the panel frame by about 0.5 to 1.5 mm so the unit can be inserted smoothly.
*3: If a hook on the installation bracket interferes with the unit, bend and flatten it with a nipper or similar tool.
Typical Mounting Brackets
.... 1 - ur--........._ .....
Example 1 | Example 2 | Example 3 |
Affix the screws to the. marks.
Vehicles other than NISSAN and TOYOTA
In some cases the center panel may require modification. (Trimming, filing, etc.)
• Removing the Main Unit
When the main unit is to be removed, disassemble it in the reverse of the order in "INSTALLING THE MAIN UNIT'(see page 48).
41 VRX485VD/MAX385VD