Clarion VRX485VD Adjusting the MONITOR, Adjusting the SETTING, Turning on/off the LOUDNESS

Basic Operations

•Adjusting the non fader output phase

You can adjust the subwoofer phase from the SETTING adjustment menu.

1.Touch the ASP tab in the SETTING menu.

2.Touch the [SUB PHASE] button in the ASP menu and a selection menu will appear.

Setting range:

oor 180 (The factory default setting is "0")

Adjusting the non fader output Low Pass Crossover

You can adjust the subwoofer phase from the SETTING adjustment menu.

1.Touch the ASP tab in the SETTING menu.

2.Touch the [SUB FILTER] button in the ASP menu and a selection menu will appear.

Setting range:

80,120 or 160Hz (The default setting is "60")

Adjusting the non fader output volume

You can adjust the volume output from the unit's Audio adjustment menu.

1.Touch the [-] or [+] key of the SW VOL item to adjust to desirable level.

Setting range:

-7 to 7 (The factory default setting is "0".)

Turning on/off the LOUDNESS

The Loudness setting emphasizes the low and high sound level areas to provide a more full and dynamic sound without distortion.

1.Enter the Audio settings menu.

2.Touch [ON] or [OFF] of the [LOUDNESS] item to turn on or off the loudness effect. (The factory default setting is "OFF").

Adjusting the MONITOR

1.Press the [PIC] button on the remote control or [MONI/ADJ] button on the MAX385VD.

2.Perform the adjustment for the desired item. See the following sections for detail.

3.Touch the [Back] key to return to the previous screen.

*In the following sections, only the details regarding adjustments are described, procedures to select items are skipped.

Adjusting the brightness, contrast and color levels

1.Touch the [PIC] key on the remote control or [MONI/ADJ] key on the MAX385VD.

2.Touch the [-] or [+] key to make adjustments to the settings to your desired levels.

"Bright":

Adjusts the brightness of the display.

"Color":

Adjusts the color saturation.

"Contrast":

Adjusts the level of black. or green is emphasized).

Bright/Color/Contrast:

The factory default setting is medium level.

Adjusting the SETTING

1.Press the [MENU] button, then touch the [SETTING] key.

2.Touch the top navigation tabs to switch between the SETTING menus. You can navigate between General, Screen, ASP, Regional, and Rating.

3.Perform the adjustment for the desired item. See the following sections for detail.

4.Touch the [Back] key to return to the previous screen.

*In the following sections, only the details regarding adjustments are described, procedures to select items are skipped.

19 VRX485VD/MAX385VD