• Contents
1. BEFORE STARTING | 38 |
2. PACKAGE CONTENTS | 38 |
3. GENERAL CAUTIONS | 38 |
4. CAUTIONS ON INSTALLATION | 39 |
5. INSTALLING THE MAIN UNIT | 40 |
6. CAUTIONS ON WIRING | 42 |
7. WIRE CONNECTION | 43 |
1.BEFORE STARTING
1.This set is exclusively for use in cars with a negative ground 12 V power supply.
2.Read these instructions carefully.
3.Be sure to disconnect the battery "- "terminal before starting. This is to prevent short circuits during installation. (Figure 1)
Car battery
2. PACKAGE CONTENTS
1.Main unit
2.Manuals
Owner'smanual & Installation manual Warranty card
3.Power supply cord
4.Bag for accessories (No.1)
Flat head screw (M5 x 8) | 8 or 4 |
Sems hexagonal bolt (M5 x 8) | 8 or 4 |
Figure 1
5.Remote control unit
6.Battery
(installed in remote control unit)
7.Finishers
3.GENERAL CAUTIONS
1.Do not open the case. There are no user- serviceable parts inside. If you drop anything into the unit during installation, consult your dealer or an authorized Clarion service center.
2.Use a soft, dry cloth to clean the case. Never use a rough cloth, thinner, benzine, or alcohol, etc. For tough dirt, apply a little cold or warm water to a soft cloth and wipe off the dirt gently.
VRX485VD/MAX385VD 38