Clarion MAX385VD, VRX485VD Connecting the Accessories, How to attach the electro-tap, ~~c Ir

.Connecting the parking brake cord

Connect the cord to parking brake lamp ground in the meter panel.

Note:

•Connecting the parking brake cord to lamp ground allows you to watch iPod video/DVD video/A V input when the parking brake is engaged.

•When the parking brake cord is not connected, the monitor will not show any video sources.

•If "AUDIO ONL Y" appears on the screen just after turning on the ACC power of the car, release the parking brake while confirming safety, and then engage the parking brake again.

.How to attach the electro-tap

cord to battery

Z

$:~

~~

z'

c'

~~

, - o z

Parking brake cord (Grass-green)

1.Place the Parking brake cord at the stopper, and fold it back in the direction of the arrow.

2.Pass the Parking brake signal cord through, and fold it back in the direction of the arrow.

Parking brake
signal cord	Parking brake
~ . /	signal cord
~~c) )Ir
Stopper	~Parking brake cord!

(G rass-green)

Connecting the Accessories

.Connection to the external amplifier

The external amplifiers can be connected to the 6 channel RCA output connections. Ensure that the connectors are not grounded or shorted to prevent damage to the unit.

.Connection to iPod devices

The iPod device can be connected to dedicated iPod connection on the main unit. For detailed information, refer to the instruction sheet or manual for the iPod cable.

Note:

•This unit may not support all functions of all iPod devices

•The iPod connection will charge your iPod unless the iPod battery is completely depleted.

.If the specified cord of the cellular phone is connected to the phone interrupt cord of the main unit, the audio mute is available when the cellular phone is used.

•Sirius Satellite Radio Receiver

When a Sirius Satellite Radio Receiver is to be connected, use the dedicated connector. For detailed information,refer to the instruction manual of the Sirius Satellite Radio Receiver.

VRX485VD/MAX385VD 46