VMA7483 11
English
Owner’s Manual
RGB button
Switches between video and RGB
display.
WIDE button
Each time this button is pressed, the
display changes in the following
order: NORMAL → WIDE →
F. WIDE → CINEMA → NORMAL.
Adjust button
Displays the image adjustment
screen and allows you to select
BRIGHT, HUE or COLOR.
MONITOR button
Turns the monitor screen on and off.
●Remote control operation
Aim the remote control unit at the remote control
sensor (supplied) within a 30° horizontal and
vertical angle.
30˚
30˚
Reception sensor window
Inserting the Batteries
1. Turn the remote control unit over, then slide
the rear cover in the direction of the arrow.
2. Insert the AA (UM-3/1.5V) batteries that came
with the remote control unit facing in the di-
rections shown in the figure, then close the
rear cover.
Notes:
Using batteries improperly can cause them to ex-
plode. Take note of the following points:
•
When replacing batteries, replace both batter-
ies with new ones.
•
Do not short-circuit, disassemble or heat bat-
teries.
•
Do not dispose of batteries into fire or water.
•
Dispose of spent batteries properly.
Rear side
AA (UM-3/1.5V)
Batteries
Rear cover
Remote Control