Starting Up and Retracting the LCD Panel
Retracting the LCD Panel
1.Make sure that the LCD panel lock button is set to “LOCK OFF”.
The LCD panel OPEN/CLOSE button does not operate when this button is set to “LOCK
ON”.
Note:
•If an attempt is made to retract the LCD panel when the LCD panel lock button has not been fully set to the “LOCK OFF” position, the LCD panel and the LCD panel lock lever will inter- fere and damage the unit.
2.Hold down the LCD panel OPEN/CLOSE but- ton on the remote control sensor for 1 sec- ond.
This action turns off the power and automati-
cally retracts the LCD panel.
Notes:
•The LCD panel is automatically retracted when the ignition key is set to OFF.
•When the unit is not to be used for a long pe- riod of time or when you leave the car, make sure to retract the LCD panel.
•Exposing the LCD panel to force when it is be- ing retracted will damage it.
3.Switch the LCD panel lock button to the “LOCK ON” position when the LCD panel has been retracted.
Precautions to Be Taken When Driv- ing on Bad Roads
When driving on bad roads such as dirt roads or in a desert, retract the LCD panel and slide the LCD panel lock button to “LOCK ON” to protect the LCD panel.
Note that the button must be in the “LOCK ON” position when the unit is installed in the ceiling of a car.
LCD panel lock lever
LCD panel lock button
English
Owner’s
Manual
LCD panel lock button
(LOCK OFF) | (LOCK ON) |
VMA7483 13
