Clarion VRX935VD manual Watching a video CD, DVD Video Player Operations Switching angles

DVD Video Player Operations

Switching angles

On DVD discs in which video images have been recorded in two or more angles, you can switch among the angles during playback.

1.Display the sub KEY PAD using the proce- dures described in the section “KEY PAD operation”.

2.Touch the [ANGLE] key during playback.

Each time you touch the key, you can switch among angles.

•Depending on the disc, up to 9 angles may be recorded. For details, see the mark of the disc (: Indicates multi-angle).

TITLE ELAPSED TITLE REMAIN

CHAPTER REMAIN CHAPTER ELAPSED

•CHAPTER ELAPSED: Elapsed time of the chapter

•CHAPTER REMAIN: Remaining time of the chapter

•TITLE ELAPSED: Elapsed time of the title

•TITLE REMAIN: Remaining time of the title

English

Owner’s manual

•Depending on the disc, angles may switch smoothly or switch with a momentary still image.

•When the power is turned on and when the disc is changed with new one, the lan- guage set at the time of factory shipment is selected. If that language has not been re- corded, the language specified on the disc.

•Depending on the disc, switching may be completely impossible or impossible on some scenes.

•It may take time to switch among angles.

•Depending on the disc, scenes recorded in two or more angles may be played back.

Displaying the playback status

1.Press the [DISP] button or touch the

[P.TIME] key in the sub KEY PAD display (using the procedures described in the sec- tion “KEY PAD operation”) during playback.

Each time you press the button or touch the key, you can switch between display (ON) and non-display (OFF) of the playback status.

•Depending on the playback status or disc, the following indication may appear.

Each time you touch the key for about 1 sec- ond or longer, you can switch among time display.

Watching a video CD

After disc loading, the play mode is automati- cally engaged.

•Button operation may not be allowed depend- ing on the story of the disc.

■After the menu screen is displayed

For V-CD discs equipped with the PBC (Play Back Control) function, the menu screen ap- pears. After the menu screen is displayed, select an item in the following operations and play it back.

Showing the V-CD menu (for V-CD discs with PBC)

This key does not function on some discs.

1.Press the [MENU] button during playback. The V-CD menu appears.

The displayed contents may differ, depending on the V-CD software.

• Example showing menu display

∗To select the menu contents, press the [KEY PAD] button and use either the “Cross KEY PAD” or the “Ten KEY PAD” according to the disc contents menu.

VRX935VD 35